|
Ideal use environment for PVC furniture edge banding
Generally speaking, in the process of producing or decorating panel furniture, producers use PVC edge banding to improve the burr problem of the furniture. It can be said that the quality of edge banding greatly affects the beauty and practicality of furniture. To meet the requirements of decorative furniture and furniture protection, the edge banding of furniture must be performed under ideal conditions of use.  One is the temperature. The ideal use temperature of edge banding is 190 to 210 degrees Celsius, but according to the brand and model, according to the characteristics of the hot melt adhesive, it can also be used in an environment of 120 to 190 degrees Celsius. The higher the temperature, the better the bonding strength of the edge banding strip. Therefore, it is recommended to use high-temperature hot melt adhesive as much as possible to obtain the ideal edge banding effect.The second is the edge banding speed. In the sealing of the edge banding rod, when the edge banding rod with a thickness of less than 0.6mm is stretched softly, the deformation and other phenomena are mainly caused by the slow sealing speed and the long time for the hot melt glue to dissolve and stay. For this phenomenon, the sealing speed can be accelerated, Use high-speed conveyor belts. Of course, the factors that affect the edge banding are not only the above two. In the edge banding process, only by selecting the ideal edge banding environment and following the edge banding rules can the edge banding effect of furniture be effectively processed. |
What are the characteristics of environmentally friendly edge sealing hot melt adhesives?
Appearance And Prospect Of Edge Sealing Hot Melt Adhesive
What kinds of situations often occur when hot melt adhesive particles are used in furniture edge sealing?
Reasons for the open edge of the edge band
